top of page
NT Finans (2).png
Adsız tasarım (2).png

41 Years of Experience

  • LinkedIn

Financial Advisory in Pricing Decisions: What Does Cost Information Add to the Decision?

Nov 9
10 min read
The financial advisory process in financing decisions
Financial Advisory

In most companies, the pricing decision sits within the sales team's area of responsibility. Market price levels, customer expectations and the position of competitors form the visible side of that decision. The less visible side is the company's own cost structure. When the actual cost of a product or service to the company is not known, the outcome of the chosen price cannot be seen in advance either.


Cost information exists in most companies; whether it is ready to be used in a pricing decision is a separate question. When the expense items in the accounting records are not broken down by product or customer, management receives them as a single total. The total shows the general position of the company; it may not contain the detail that would guide one specific pricing decision.


Financial advisory enters the picture at this point. The function of an advisory service in the pricing process is not to set the price. Its function is to place correctly calculated, current and comparable cost information in front of the people who make the pricing decision. When that information is ready, the sales team sees which price level is sustainable for the company, and management can follow the combined outcome of the pricing decisions taken.


This article addresses the contribution of financial advisory to the pricing decision under three headings: The level at which cost information is prepared, the calculations used in the pricing decision, and the way those calculations are tied to a regular process.


At Which Level Does Financial Advisory Prepare Cost Information


Whether cost information can be used for a decision depends on the level at which it is broken down. Total company cost appears in the financial statements and is ready at period end. The pricing decision, however, is taken at the level of a product, a service, a customer or an order. The gap between these two levels is the first focus of financial advisory work.


Product-level costing begins with separating direct and indirect expenses. Raw materials, packaging and direct labour can be tied directly to the product. Energy, maintenance, rent, quality control and administrative expenses are shared among products through an allocation key. The choice of allocation key is one of the factors that determine the accuracy of product cost. Machine hours, units produced or labour hours load the same expense onto products in different proportions. Financial advisory supports the selection of a key suited to the company's production or service structure and the regular review of that key.


Capacity utilisation also affects cost information. The share of fixed expenses reflected in unit cost changes with production volume. A unit cost calculated in a period of low capacity utilisation comes out at a different level from one calculated in a period close to full capacity. When the pricing decision ignores this difference, a temporary drop in volume can turn into a permanent price increase. In financial advisory work, unit cost is calculated on planned normal capacity, and period-related deviations are monitored as a separate item.


The currency of cost information is a separate heading. Raw material prices, energy tariffs, labour costs and exchange rates change within the period. A cost table prepared at the beginning of the year may have lost its validity by mid-year. When price quotations are prepared with outdated cost data, the difference is absorbed by the company's margin. Financial advisory defines how often cost data will be updated and which changes in which items will trigger an update.


The source of cost data is also addressed at this stage. The records kept by production, purchasing, warehouse and accounting functions often sit in different systems and use different definitions. There may be a timing or definition difference between the raw material price recorded by purchasing and the price accounting uses in costing. Until these differences are resolved, product cost changes depending on whose data is consulted. Part of financial advisory work is to determine which source will be the basis for costing and how data will be aligned across functions.


The inventory valuation method is among the factors that affect product cost. In an environment where raw material prices rise within the period, the price at which material leaving stock is charged to cost changes the unit cost. A price set on a cost calculated at old prices may not cover the cost of replenishment. Financial advisory proposes a calculation approach in which current replacement cost is taken into account alongside the cost in the accounting records.


In service companies the cost structure is handled differently. Here the main cost element is staff time. Recording the time devoted to a project or a customer is the precondition for calculating service cost. In service companies without time records, the price is set according to the market level, and what the company earns from that service disappears into the period total. Financial advisory contributes to establishing a costing framework in service companies based on time and resource records.


The common output of this work is a current, itemised and capacity-adjusted unit cost for every product or service. When that information is ready, the pricing decision rests on calculation rather than estimate. The accounting infrastructure must be capable of producing this information; within our accounting systems service we support the structuring of the recording framework around decision needs.


Which Calculations Does Financial Advisory Bring to the Pricing Decision?


Once cost information is prepared, the calculations to be used in the pricing decision come into play. These calculations show at which level a price is meaningful for the company and below which level it begins to generate losses. Financial advisory brings these calculations in front of decision makers in a regular and understandable form.


The first calculation is the contribution margin. The amount remaining when the variable costs directly attributable to a product are deducted from its selling price shows that product's contribution to fixed expenses and profit. A product with a positive contribution margin may be serving to cover the company's fixed expenses even when it does not appear profitable on its own. This calculation shows which products have room for movement in price and which products are priced at the limit.


The second calculation is profitability analysis by product and by customer. The same product may be sold to different customers on different terms. Delivery method, order size, special packaging requests or the after-sales support burden change the cost at customer level. When these items are not included in product cost, a customer relationship that looks profitable on paper may in fact be a burden on the company. Financial advisory separates customer-specific cost items and prepares the ground for pricing decisions to be taken at customer level.


The third calculation is the break-even point. When it is known at which sales volume fixed expenses are covered, the relationship between price and volume becomes visible. The additional volume needed to compensate for a price reduction, or the volume loss up to which a price increase still works in the company's favour, is established through this calculation. When the sales team can access this calculation while evaluating a discount request, it sees the outcome of the decision for the company as a whole in advance.


The fourth calculation is volume scenarios. The relationship between price and sales volume is not the same for every product and every market. The volume response a price increase may cause in a given customer group can be read to a certain extent from past sales data. When that data is prepared, the pricing decision is evaluated across several scenarios rather than on a single figure. In each scenario the expected volume, contribution margin and total result are placed side by side, and management sees which scenario is consistent with the company's capacity and cash structure.


Passing cost increases through to price is a separate decision. Passing on all, part or none of a cost increase arising from raw materials, energy or exchange rates produces a different result for each product and customer. For that decision to be taken, the size of the increase at product level and the extent to which the current margin can absorb it need to be known. Financial advisory calculates the effect of the cost increase at product and customer level and contributes to an informed pass-through decision.


The calculations presented to the pricing decision in financial advisory work can be grouped under the following headings:

→ Unit cost: Current, itemised and capacity-adjusted cost per product or service

→ Contribution margin: The difference between selling price and variable cost, and its contribution to fixed expenses

→ Customer profitability: The result after customer-specific service, delivery and support costs are deducted

→ Break-even volume: The sales level at which fixed expenses are covered under the current price and cost structure

→ Price floor: The minimum price level below which the contribution margin turns negative

Each of these calculations is informative on its own; taken together they show the pricing decision as a whole. A product may show a high contribution margin while customer profitability comes out low, or the break-even volume may not be reachable with existing capacity. Financial advisory contributes to reading these calculations consistently with one another and presenting them to decision makers within a single framework.


The way the calculations are presented also affects decision quality. A pricing assessment presented to the board or the general manager calls for a summary framework showing which decision leads to which outcome, rather than detailed tables. Which products are sold close to the price floor, which customers fall below the planned margin and how much a given price change would contribute to the total result can be summarised under a few headings. Financial advisory determines which indicators appear in that summary and which detail is provided in addition, so that decision makers see the whole without getting lost in detail.


The financing dimension of the pricing decision is assessed alongside these calculations. We addressed the effect of payment terms, discounts and price adjustment conditions on the cash cycle in detail under the relationship between pricing, cost structure and financial strategy. Cost information and financing terms form two sides of the same decision; without one, the other remains incomplete.


To Which Process Does Financial Advisory Tie the Pricing Decision?


If preparing cost information and running the calculations remains a one-off exercise, its effect is limited as well. Pricing decisions are taken continuously in companies; every new quotation, every contract renewal and every discount request is a separate decision point. Financial advisory establishes a process so that the same information can be used with the same accuracy in each of these decisions.


The first element of the process is the update calendar for cost data. Which items will be reviewed at what frequency is determined in advance. Variable items such as raw materials and energy can be updated monthly, while allocation keys and capacity assumptions can be updated quarterly. Once this calendar is defined, the sales team knows which dated cost data it is working with, and management can be confident that quotation prices reflect current cost.


The second element is the authority and approval limits in the pricing decision. The discount level a sales representative may grant, the level that requires management approval and the level that will not be applied under any circumstances because it falls below the price floor are put in writing. When these limits rest on cost calculation, the approval process stops being an arbitrary control and becomes a mechanism that protects the company's margin structure. The sales team remains free within its own area, and management sees the decisions that go beyond the limits.


The third element is reporting the outcome of pricing decisions. Comparing the prices granted with actual cost reveals the difference between planned and realised margin. This comparison can be made by product, by customer and by sales representative. If the difference consistently falls in the same direction, there is a point to be reviewed either in the cost calculation or in the pricing policy. Financial advisory defines how often and at what level of detail this report will be prepared and ensures that it reaches management regularly.


The fourth element is the way cost information is passed on to the sales team. Detailed cost tables prepared by the finance function may not be usable during a sales negotiation. What the sales team needs is a simple tool that shows, for each product, the price floor, the target price and the discount authority at a glance. Preparing this tool and keeping it current forms the implementation side of financial advisory work.


Part of the process is also the division of work between the finance and sales functions. The finance function prepares the cost data; the sales function takes the pricing decision. For the process to work, these two functions need to operate with the same definitions and the same dated data. Under which conditions the finance function's view will be sought during quotation preparation, and which approval step will be followed for high-value or long-term contracts, is defined in advance. Financial advisory supports putting this division of work in writing and establishing a regular flow of information between the two functions.


Contract renewals are the moments at which this process is tested. When the cost and margin data realised over the contract term is ready at the renewal date of an annual or multi-year contract, the price for the new term is set on the basis of that data. When the data is not ready, the renewal discussion proceeds from the previous term's price and according to the customer's request. Financial advisory ensures that the profitability data for the relevant customers and products is prepared in advance, in line with the renewal calendar.


Once this process is in place, the pricing decision also becomes connected to the company's planning and budgeting cycle. Whether the margin level foreseen in the budget is being protected through pricing decisions can be monitored during the period. Bringing the pricing framework into the same structure as the budget and reporting framework is the precondition for that monitoring.

One output of the process is its contribution to investment decisions. When a new product line or a capacity investment is being evaluated, knowing the actual cost and margin structure of existing products shows at which price level the investment will pay for itself. We shared how this information is monitored after the investment under post-investment monitoring and measurement intervals.

 

The pricing decision is one of the decisions a company takes every day, and each one directly affects the margin structure. Bringing cost information into that decision in a ready, current and itemised form allows the decision to rest on calculation rather than estimate. The contribution of financial advisory to the pricing process is not to set the price; it is to place the right information in front of those who set it, and to establish the process that allows that information to be used with the same accuracy in every decision.


At NT Finans Partners, we break down your company's cost structure at product and customer level, prepare the calculations to be used in your pricing decisions and support tying those calculations to a regular process. For financial advisory support in your pricing decisions, you can contact us

Comments


bottom of page